Features

• The Fixed Plate Adapter can be installed on an operating tank, by two people in less than one hour, and will allow the area to accept our Standard Safe Sleeve.
• The Fixed Plate Adapter is split, and it can be placed around the gauge or guide pole and can be either flange mounted or clamped to the pole.
• If you have a unique designed Fixed Plate Adapter, a custom built Safe Sleeve can be provided as well.

Fixed Plate Adapter with No Rollers

With this design, the Fixed Plate Adapter is held in position against the pole with angle iron brackets that are bolted to the Fixed Plate.

Fixed Plate Adapter with Two Rollers

For forty-foot tall tanks, the well through roof size must exceed the guide or gauge pole pipe size by three sizes.

Example: If you have an 8” guide or gauge pole, the well should be 14”.

Fixed Plate Adapter with Four Rollers

This design is used on forty-foot tanks, where the tank shell is vertically plumb, to keep the guide or gauge pole centered in the well, and when the well to guide or gauge pole clearance has only a two-pipe size difference.

This is necessary to ensure that the guide or gauge pole does not come into contact with the well wall and interact with the Safe Sleeve Fabric.

Fixed Plate Adapter Custom Made

This design is used on forty-foot tanks, where the tank shell is vertically plumb, to keep the guide or gauge pole centered in the well, and when the well to guide or gauge pole clearance has only a two pipe size difference.

This is necessary to ensure that the guide or gauge pole does not come into contact with the well wall and interact with the Safe Sleeve Fabric.

Request a Quote